Tailstock for GT-Jr and GT-75
This headstock mounted tailstock is great for special applications were the part must be supported for machining.
- The center assembly can be mounted on all GTs.
- Live centers are available with machine that have 1/2" center height. 3/8" machines are limited to dead centers only
- Tailstock activation can be pneumatic or manual lead screw driven
- The tailstock clears the tooling plate.
- Tailstock stroke: 4" max
- The tailstock can be mounted at any point in Z so you can make the most of the 4" of travel.
Contact your factory representative for details and application assistance.
|