GT-Jr Price list - 2/05
OmniTurn GT-Jr. including: 5 hp spindle drive, flood coolant, pneumatic collet closer, 10 MB hard drive, 220V 1 or 3 phase (C axis drive 3 phase only), Extended X axis travel 12" |
4 degree spindle nose
Threaded Spindle Nose - new 4/03
|
½" center height |
3/8" center height |
2" center height -
|
Vertical cut off |
C axis spindle drive, 3 phase only |
Short cycle option for C axis spindle drive - |
Halogen work lamp - |
Foredom live tool including: 220V single phase 1/4hp motor - 20,000 rpm max, spindle, drive shaft, speed controller, 1/8"" & 1/4"" collet, lubricant for spindle bearings. |
Suhner live tool - light duty- Includes Minifix drive, NA7 cable, BEWI-4 spindle |
Suhner live tool Medium duty - includes motor - 1,020 to 14,400 rpm in 7 steps via gear box., spindle - uses ER16 collets - 10mm max, drive shaft. 1.36hp, 220V 3 phase. |
M function controlled outlet: 220V three phase |
M function controlled pneumatic outlet, no FRL, 8cfm |
M function controlled outlet: Pneumatic with FRL, 8 cfm |
M function controlled outlet for NSK Astro-E400. Includes 24V control logic and power supply, pneumatics for spindle purge |
M function controlled outlet for NSK Astro-E250. Includes relay control of spindle on/off. |
Lag bolt kit for OmniTurn GT-75 and GT-Jr |
OmniZip Fast pneumatic rear end loader |
TripleAir pneumatic bar feed 12' x 1-1/16" |
OmniTurn 3" - 2 jaw chuck, .25"" diameter stroke, blind, max 5000 rpm. Requires the pneumatic collet closer option |
OmniTurn 4" - 3 jaw chuck, .25" dia. stroke, blind, 5,000# holding force. Requires the pneumatic collet closer option |
OmniTurn 4.5" - 3 jaw chuck, .17"" dia. stroke, 1" through hole, 4000# holding force. Requires the pneumatic collet closer option |
Part Conveyor - installed at factory.
Price does not include Required M function controlled outlet, 110V. Or the conveyor runs continuously. M function outlet is
available if spare M function is available. |
Through the spindle coolant |
Additional I/O package, 8 in/6 out, programmable from Control |
Transformer for control - 220V to 115V - 750 KVA |
* Startup by OmniTurn Tech. - Travel and expenses billed at cost |